全景天窗汽车车身刚度分析及优化设计(3)
本文没有考虑刚度性能更好的材料,未来可以采用性能更好的车身材料或一体冲焊的车身结构来提高全景天窗车身刚度。
参考文献/References:
[1]段月磊.轿车车身刚度有限元分析及优化[D].合肥:合肥工业大学, FEM Analysis and Optimization on Car Body[D].Hefei:Hefei University of Technology,2010.
[2]HOWARD M,HDELMA N,RAPAEL analysis of discrete structural systems[J].AIAA Journal,1986,24(5):321-326.
[3]CHOI J K,LEE Y R,CHOI S H,et al.T type joint structural optimization of automobile body structure[J].Mechanism and Machine Theory,1991,26(7):741-750.
[4]NIMA B,PETER A,MATTHIAS F,et al.A new approach for sizing shape and topology optimization[J].Computer Methods in Applied Mechanics and Engineering,1996,5(8):541-554.
[5]马迅,过学迅,赵幼平,等.车身结构中常用薄壁构件的刚度分析[J].湖北汽车工业学院学报,2000,14(4):1-7.MA Xun,GUO Xuexun,ZHAO Youping,et analysis of the thin-wall components in the body structure[J].Journal of Hubei Automotive Industries Institute,2000,14(4):1-7.
[6]胡宁.轿车车身刚度分析[J].汽车技术,1997(9):9-13.HU analysis of car body[J].Automotive Technology,1997(9):9-13.
[7]杨凤玲.车身刚度计算方法与优化研究[D].长春:吉林大学, on Car Body Stiffness Calculation Method and Optimization[D].Changchun:Jilin University,2013.
[8]陆勇,江开勇,周方明,等.客车侧翻中的车身骨架刚度匹配研究[J].机械设计,2014,31(10):84-87.LU Yong,JIANG Kaiyong,ZHOU Fangming,et al.Study on stiffness matching design of body frame in bus rollover[J].Journal of Machine Design,2014,31(10):84-87.
[9]管欣,史建鹏.轿车整体扭转刚度分配比的确定[J].吉林大学学报(工学版),2011,41(sup2):12-16.GUAN Xin,SHI analysis for whole torsional stiffness of passenger car[J].Journal of Jilin University(Engineering and Technology Edition),2011,41(sup2):12-16.
[10]金佳钰.汽车碰撞损失特性研究[D].沈阳:沈阳航空航天大学,2018.JIN on the Loss Characteristics of Vehicle Collision[D].Shenyang:Shenyang Aerospace University,2018.
[11]李测测.轿车追尾厢式货车碰撞相容性研究[D].沈阳:沈阳航空航天大学,2018.LI on Collision Compatibility of Car Rear-end Van[D].Shenyang:Shenyang Aerospace University,2018.
[12]王家顺,安琦.汽车碰撞试验中碰撞过程的运动及力学性能[J].华东理工大学学报(自然科学版),2017,43(6):863-870.WANG Jiashun,AN and mechanical properties of the collision process in vehicle collision test[J].Journal of East China University of Science and Technology(Natural Science Edition),2017,43(6):863-870.
[13]陈海潮,周文超,徐中皓,等.基于统计分析的白车身刚度关键参数研究与应用[J].汽车工程,2016,38(10):1278- Haichao,ZHOU Wenchao,XU Zhonghao,et and application of key stiffness parameters of bodyin-white based on statistical analysis [J].Automotive Engineering,2016,38(10):1278-1282.
[14]李金龙.某轿车白车身刚度、强度及模态有限元分析[D].重庆:重庆大学,2015.LI Element Analysis of Stiffness,Strength and Mode of a Body-in-white [D].Chongqing: Chongqing University,2015.
[15]彭云.基于汽车侧碰简化模型的车身刚度研究[D].长沙:湖南大学, on Stiffness of Car Body for Side Impact Based on Simplified Model [D].Changsha: Hunan University,2014.
[16]任康.汽车车身刚度分析及焊点布局优化研究[D].合肥:合肥工业大学,2013.REN Analysis of Automobile Body and Optimization of Solder Joint Layout[D].Hefei: Hefei University of Technology,2013.
文章来源:《机械强度》 网址: http://www.jxqdzzs.cn/qikandaodu/2021/0303/496.html
上一篇:基于城轨列车用齿轮传动系统箱体强度分析
下一篇:如何防止农机发动机连杆螺栓折断