牙种植体的生物力学研究(6)
[13] 王姝, 李琼, 金武龙. 有限元法在口腔种植领域的研究进展[J]. 中华老年口腔医学杂志, 2018, 16(2): .Wang S, Li Q, Jin WL. The research progress of finite element method in dental implants[J]. Chin J Geriatric Dent, 2018,16(2): .
[14] 王晓洁. 牙种植体的三维有限元分析和生物密封研究[D].成都: 四川大学, XJ. Threedimensional finite element analysis and bioseal study of dental implants[D]. Chengdu: Sichuan University, 2005.
[15] Holmgren EP, Seckinger RJ, Kilgren LM, et al. Evaluating parameters of osseointegrated dental implants using finite element analysis—a twodimensional comparative study examining the effects of implant diameter, implant shape,and load direction[J]. J Oral Implantol, 1998, 24(2): 8088.
[16] 陈新民. 口腔生物力学[M]. 北京: 科学出版社, 2010: .Chen XM. Oral biomechanics[M]. Beijing: Science Press,2010: .
[17] 王宗篪, 谢培庆, 庄国铭, 等. 仿生种植牙三维有限元模型[J]. 三明学院学报, 2006, 23(2): .Wang ZC, Xie PQ, Zhuang GM, et al. The threedimensional finite element model of bionic dental implant[J]. J Sanming Univ, 2006, 23(2): .
[18] Seong WJ, Grami S, Jeong SC, et al. Comparison of pushin versus pullout tests on boneimplant interfaces of rabbit tibia dental implant healing model[J]. Clin Implant Dent Relat Res, 2013, 15(3): .
[19] Beer A, Gahleitner A, Holm A, et al. Correlation of insertion torques with bone mineral density from dental quantitative CT in the mandible[J]. Clin Oral Implants Res, 2003, 14(5):.
[20] 栗兴超, 董福生, 李向军, 等. 不同颈部结构钛人工牙种植体的骨结合性能研究[J]. 现代口腔医学杂志, 2017, 31(3): .Li XC, Dong FS, Li XJ, et al. Study on the osseointegration of titanium dental implant with different neck structure[J].J Modern Stomatol, 2017, 31(3): .
[21] Li DH, Ferguson SJ, Beutler T, et al. Biomechanical comparison of the sandblasted and acidetched and the machined and acidetched titanium surface for dental implants[J]. J Biomed Mater Res A, 2002, 60(2): .
[22] Huang HM, Lee SY, Yeh CY, et al. Resonance frequency assessment of dental implant stability with various bone qualities: a numerical approach[J]. Clin Oral Implants Res,2002, 13(1): 6574.
[23] Nkenke E, Hahn M, Weinzierl K, et al. Implant stability and histomorphometry: a correlation study in human cadavers using stepped cylinder implants[J]. Clin Oral Implants Res,2003, 14(5): .
[24] Lee SY, Kim SJ, An HW, et al. The effect of the thread depth on the mechanical properties of the dental implant[J]. J Adv Prosthodont, 2015, 7(2): .
[25] 李璁. 纯钛种植体表面不同粗化处理对种植体强度的影响[D]. 石家庄: 河北医科大学, 2016.Li C. Effects of different roughening treatments on the strength of pure titanium implants[D]. Shijiazhuang: Hebei Medical University, 2016.
[26] 栗兴超, 董福生, 李向军, 等. 表面粗化处理不均衡螺纹钛人工牙种植体的疲劳性能研究[J]. 现代口腔医学杂志,2017, 31(4): , 234.Li XC, Dong FS, Li XJ, et al. Study on the fatigue performance of the uneventhreaded titanium dental implants treated by surface roughening[J]. J Modern Stomatol, 2017, 31(4):, 234.
[27] 张波. 牙种植体生物力学评价研究进展[J]. 中国实用口腔科杂志, 2014, 7(9): .Zhang B. Advances on the biomechanical evaluation methods of dental implant[J]. Chin J Pract Stomatol, 2014, 7(9): .
[28] Soliman TA, Tamam RA, Yousief SA, et al. Assessment of stress distribution around implant fixture with three different crown materials[J]. Tanta Dent J, 2015, 12(4): .
[29] 张永丽. 四种不同形状种植体应力分布比较的三维有限元分析[D]. 济南: 山东大学, YL. Threedimensional finite element analysis of stress distribution of implants with four different shapes[D].Jinan: Shandong University, 2003.
[30] Lee DW, Choi YS, Park KH, et al. Effect of microthread on the maintenance of marginal bone level: a 3year prospective study[J]. Clin Oral Implants Res, 2007, 18(4): .
[31] Oswal M, Amasi U, Oswal M, et al. Influence of three different implant thread designs on stress distribution: a threedimensional finite element analysis[J]. J Indian Prosthodon Soc, 2016, 16(4): .
[32] 马洁, 王维丽, 雷蕾, 等. 种植体颈部不同螺距动态负载的生物力学分析[J]. 解放军医学院学报, 2016, 37(7): , 797.Ma J, Wang WL, Lei L, et al. Biomechanical analysis of stress distribution of dental implant with different neck thread pitch design under dynamic loading[J]. Acad J Chin PLA Med School, 2016, 37(7): , 797.
[33] 王维丽, 马洁, 李鑫, 等. 反支撑形螺纹种植体即刻负载时应力分布的三维有限元分析[J]. 口腔颌面修复学杂志,2016, 17(4): .Wang WL, Ma J, Li X, et al. Analysis of the biomechanics stress distribution of the reverse buttress thread implant under immediate loading: a three dimensional finite element study[J]. Chin J Prosthodont, 2016, 17(4): .
文章来源:《机械强度》 网址: http://www.jxqdzzs.cn/qikandaodu/2020/1216/406.html
上一篇:烟草机械中故障诊断技术的应用
下一篇:机械电子工程中控制工程的应用分析